Our perfect fit promise
Hassle no more! Ever got stuck with a hole in a ceiling when replacing downlights? With these 3D printed downlights we guarantee a perfect fit. Check out how perfect fit downlights smoothens your installation projects.
Key specifications Operational Schematic light drawingsDriver variantsOpticalElectricalDownloadsSustainability
Configure GreenSpace
Downlight refits made easy.
Easy 1:1 replacement fitting any cut out from 150-280 mm. Say goodbye to costly & time-consuming adaptor rings.
Your apeture, perfectly matched. Every time.
Integrated intelligence offering seamless connectivity through integrated sensors for daylight control and presence detection. Saving you precious intallation time.
Designed for circularity reducing waste with 75% bio‑circular materials for housing and trim, and easy-to-recycle design.
Tune to your needs with tailored lighting specs, emergency options, and a wide variety of cables & connectors
Key specifications
- Fits any cut-out from 150mm to 280 mm
- Rich palette of trim colors and decorative optics to match your design
- Wide range of optics - high gloss, office compliant (UGR19), white, black, brass with beautiful textures
- Efficacy up to 162 lm/W for short pay-back time
- Wide range of lumen packages - 700, 1400, 2000, 3000, 4000, 5000 lumens
- Printed parts are made with > 75% mass balanced bio-circular material
- IP54 option for under canopy
- Sensor option with presence detection and daylight dimming
- Emergency
- Wide offer in cabling options
- Dust protection cover for a spotless result. Remove before operation.
- Made in Europe
Operational
Protection Class
IP20 / IK02
IP54 / IK06 for PCO & PCC (except for U4, U5 & PCO + ELP3, ELD3, ELW3)
Electrical Class II
Ambient Range
+10° TO +35° / -20° TO +35° FOR PCO & PCC (except for U4, U5, ELP3, ELD3, ELW3, cabling options)
Certifications
CE, RoHS, ENEC
Glow Wire Test
650°C
Warranty
5 Years
Schematic Light Drawing
Driver variants
PSU-E (non dimming)
PSD-E (DALI dimming)
DIA-E (DALI InterAct dimming)
WIA-E (Wireless InteAct dimming)
SIA-E (Sensor ready driver)
Optical
Description
LED Module
Common Core State Standards
CRI80+ , 3000K, 4000K
CRI90+ , 3000K, 4000K, Tunable White 2700K-6500K
Binning
SDCM <3
Lumen maintenance (EN-IEC 62722-2-1) at median useful life
100,000hrs, L100 @25°C Ta for 830/840/930/940 types with constant light output (CLO)
100,000hrs, L90 @25°C Ta for 830/840/930/940 types in 700/1400 and on request 2000 lumens
100,000hrs, L80 @25°C Ta for 830/840/930/940 types in all other lumen packages
Electrical
Input Voltage
220-240VAC
Frequency
50-60Hz
Power factor
>0.9
Control gear failure rate at median useful life
<10% @ 100,000 hrs for Tambient 25°C
Sustainability
Materials
Housing & trim are produced with at least 75% mass-balanced bio-circular polycarbonate.
Heat Sink made of 55% Post consumer recycled aluminium
Designed for circularity
Toolles replacement of trim, optic, cover
Fast replacement of driver and LED board with simple tool
Downloads
GreenSpace
